Equipment for Electrotherapy

Equipment for ultrasound therapy

Combined machines

Equipment for magnetic therapy

Equipment for radar therapy

RADARMED 2500

Equipment for pressuere therapy

Equipment for laser therapy

Rehabilitacion Physiotherapy

EQUIPMENT FOR RADAR THERAPY

RADARMED 2500

Available models 2500 C - 2500 CP

Accessories supplied

• LCD TFT g6 inch graphic display

• 64 Kbits smart memory card

• integrated serial command

• 2 x 16 bit microprocessors

• maximum power above 1600 Watt (in pulsed mode)

• 50 pre-set protocols

• 50 protocols for memorization

• alarm in case of overheating

• exclusive protection system...increases magnetron duration

Description

Equipment for continuous and pulsed radar therapy

The “Radarmed 2500” series represents a step ahead in the field of microwave therapy. The application of advanced technology makes it possible to use machines which can be constantly updated and integrate functions which will be available in the years to come. Such technology derives from the modern Personal Computer systems using a smart card or by simply consulting our web site on-line and updating the machine's functions, programmes and anything else our Research Department has come up with and made available.
Equipment for microwave or rada therapy consists of 2 models which differ from each other in their power output: Radarmed 2500C runs on continuous current and Radarmed 2500CP runs on continuous pulsed current.
The core of the machine is represented by an apparatus consisting of latest design cavity oscillator capable of bringing the electrical frequency of a sinusoidal alternated current to approximately 2,5 – 3 billion cycles per second (GHz) and enables work in both continuous and pulsed: 25% - 50% - 75% - 100% (this can reach peak power at output up to 1600 Watt.)
The fact that pulsed functioning can be used as an alternative to continuous allows the operator to carry out prolonged sessions without causing patient to experience discomfort due to excessive heat.
Personalised patient cards can be created using the smart memory cards. A convenient encoder allows for quick selection of the current and/or protocol to be emitted and accesses a library of 50 programmes, as well as enabling the operator to create and memorise up to 50 different simple or sequential work cycles.
The optional radio commanded remote control can command the main functions of the machine from any part of the room without having to point in the direction of the machine.The voice synthesizer (optional) allows for both poor sighted or blind persons to

Available models

Radarmed 2500 CP continuous and pulsed
Radarmed 2500 C continuous only.

Antennas

AC
Cone antenna (provided) used mainly for local application on articulation (e.g. elbows, wrists, knees, feet) and for use in pediatrics

AR
Rectangular antenna diam. 47 x 12 x 7 cm used mainly for treatment on extensive areas such as lumbar area, cervicobrachial, upper and lower limbs etc..

A3D
Three-dimensional antenna mainly used for shoulders, neck and vertebrae.